Model 3034/3038 Quick Start Guide
3
1.0 Connecting power
1.1 Connecting the power supply
AC Power
1.
Connect the AC power cord female plug directly to the AC connector.
2.
Connect the AC power cord male plug to an AC power outlet (120–240 VAC).
The
Power
LED blinks as the unit is powering up. When the
Power
LED stops blinking and remains lit, the unit is
ready for user configuration. (See Figure 2 on page 4).
External Power (AC)
An LPS 120/240V AC to 5VDC adapter is supplied with the EUI version of the Model 3034/3038.
1.
The female plug on the AC power cord plugs into the male AC connector on the adapter.
2.
Connect the AC power cord male plug to an AC power outlet (120–240 VAC).
External Power (DC)
A 48VDC to 5VDC adapter is supplied with the E48 version of the Model 3034/3038.
1.
The barrel power connector plugs into the barrel power supply jack on the unit.
2.
The black and red leads connect to the DC source (nominal 48VDC).
Figure 1.
Connecting DC Power to the DC Power Supply
The interconnecting cables shall be acceptable for external use and shall be rated for
the proper application with respect to voltage, current, anticipated temperature, flam-
mability, and mechanical serviceability.
There are no user-serviceable parts in the power supply section of the Model 3034/
3038. Contact Patton Electronics Technical support at (301)975-1007, via our web site
at http://www.patton.com, or by e-mail at [email protected], for more informa-
tion.
CAUTION
To Power
Supply Jack
To -48VDC
Source
-Vin
+Vin
SWITCHING POWER SUPPL
Y
MODEL
: SYD1
106-0505
INPUT
: 36-60V 0.2A
MAX
OUTPUT
: +5V 1.0A
OUTPUT
POWER : 5W MAX
S/N
: G01234567890
MADE IN CHINA
BY
SUNNY
Black lead (-V)
Red lead (+V)
Barrel power connector
WARNING
