Patton electronics SmartNode 4170, User Manual, Page: 17 / 52

Table 3. Rear Panel Ports (Continued)
Port Description
Console
Used for service and maintenance, the console port (see
figure 2
on
page 16) an RS-232 RJ-45 connector, connects the product to a serial
terminal such as a PC or ASCII Terminal (also called a dumb terminal).
Configuration settings:
•
19200 bps
•
8 bits, no parity
•
1 stop bit
•
flow control off
12V DC, 1A
Electricity supply socket. (see
figure 2
on page 16)
Reset
The reset button (see
figure 2
on page 16) has three functions:
•
Restart the unit with the current startup configuration—Press (for less
than 1 second) and release the
Reset button to restart the unit with
the current startup configuration.
•
Restart the unit with factory default configuration (shipping-config)—
Press the
Reset button for at least 5 seconds but no longer than 15
seconds until all LEDs (see
figure 3
on page 18) starts to blink, to
restart the unit with factory default configuration.
•
Restart the unit with factory default configuration (shipping-config and
factory delivered Wizard files) and remove Wizard files added by user
as well as user uploaded preference files — Press the
Reset button
for 15 or more seconds until all LEDs blink faster
SmartNode 4170 Overview 17
SmartNode 4170 User Manual 1 • General Information