EN
128
EN
129
SWITCH ON/OFF
To start the tool, push the on/ off switch
11
to position
I
until it clicks into place.
1
WORKING INSTRUCTIONS
Hold the blow pipe
2
several centime-
tres above the ground, make sweeping
movements from side to side and walk
slowly forwards.
1
To switch off the tool, push the on/ off
switch
11
to position
0
until it clicks into
place.
2
Warning!
Keep the collected pile of re-
fuse in front of you and blow around the
outer edge. Do not blow into the center of the
pile!
PREPARING THE BLOWER
Remove the fixing screw
3
on the un-
derside of the blow pipe
2
.
1
To remove, press the battery release
switch
6
and pull out the battery
5
.
2
INSERT/ REPLACE BATTERY
Press the charged battery
5
(not includ-
ed) into the insertion slot
7
until it clicks
into place.
1
Push the blow pipe
2
onto the connec-
tion piece
9
until it clicks into place.
Fix the blow pipe
2
with the fixing
screw
3
to the leaf blower.
2
2.
1.
2
1
1
2
1
1
2.
1.
2
