EN
90
chisel or accessory.
Accessories may be
hot after prolonged use.
h)
Do not run the tool while carrying it at
your side.
The spinning drill bit may be-
come entangled with clothing and injury
may result.
MACHINE SPECIFIC SAFETY WARNINGS
a)
Only work with tools assembled cor-
rectly.
Check the proper fit of the tool and
its accessories by pulling it.
b)
Make sure that the area beneath the
working height is free.
c)
Check the hammer and its accessories
before every use for rust and damage.
Do not use the hammer, if it is damaged
or deformed.
If you observe a damage,
contact your HORNBACH store.
d)
Reduce dust pollution. While working,
particels occur which could cause can-
cer, allergic reactions, respiratory dis-
eases, birth defects or other reproduc-
tive harm.
Examples: Lead in lead paint,
mineral dust in brick or concrete, asbestos,
metals, wood preservative like chromate or
wood dust from oak or beech. Always wear
hearing protection, protection glasses, pro-
tection gloves, dust mask and safety boots
while working with the hammer to avoid
injuries.
e) Vacuum or wash the safety equipment. Do
not blow, beat or brush off the dirt particles.
RESIDUAL RISKS
Even if you are operating this product in ac-
cordance with all the safety requirements,
potential risks of injury and damage remain.
The following dangers can arise in connection
with the structure and design of this product:
1. Injuries and damage to property due to bro-
ken application tools.
2. Danger of injury and property damage
caused by flying objects.
