EN
88
Warranty
This Pattfield item has been produced accord-
ing to state-of-the-art production methods
and is subject to ongoing strict quality control.
HORNBACH Baumarkt AG, Hornbachstrasse
11, 76879 Bornheim, Germany, guarantees
the quality of the machines according to the
following terms and conditions.
1. Warranty Period
The warranty period is 3 years. The warranty
period starts on the date of purchase. Please
retain the original receipt or invoice in order
to be able to furnish evidence of the date of
purchase.
2. Warranty Scope
The warranty applies exclusively to production
or material defects. The warranty applies only
in the case of private use of the item.
The warranty does not apply to defects result-
ing from
• misuse or improper use,
• use of force or external influences,
• damage due to failure to observe the instal-
lation instructions or instructions for use,
• connecting to an incorrect grid voltage or
current type,
• unprofessional installation,
• overloading the device,
• use of non-approved attachments or acces-
sories,
• failure to observe the maintenance and
safety instructions,
• entry of foreign matter into the device,
• wear and tear due to normal use or
• commercial use.
Furthermore, the warranty does not cover
damage to parts subject to wear and tear,
which is caused by normal wear and tear. The
warranty does not comprise any collateral or
consequential damage or possible installation
and dismantling costs in the event of a war-
ranty incident.
Care & Maintenance
Caution!
Make sure the tool is
switched off and unplugged.
- Make sure the dust box
6
is empty and un-
clogged.
- Always keep the tool clean, dry and free of
oil or grease.
- Wear safety glasses to protect your eyes
whilst cleaning.
- For safe and proper working, always keep
the machine and ventilation slots clean.
- Regularly check to see if any dust or foreign
matter has entered the grills near the mo-
tor and around the on/off switch. Use a soft
brush to remove any accumulated dust.
- If the body of the tool needs cleaning, wipe
it with a soft damp cloth. A mild detergent
can be used but nothing like alcohol, petrol
or other cleaning agent.
- Never use caustic agents to clean plastic
parts.
- Lubricate all moving parts at regular inter-
vals.
- Periodically check all fixings. These could
become loose with time due to vibration.
Caution!
If the supply cord is dam-
aged, it must be replaced by the
manufacturer or its service agent or simi-
larly qualified person in order to avoid haz-
ard.
