-9-
that part of the workpiece which is solidly
supported, not on the section that will fall off
when the cut is made.
As examples,
Fig. 5
illustrates the RIGHT way
to cut off the end of a board, and
Fig. 6
the
WRONG way.
If the workpiece is short or small, clamp it
down. DO NOT TRY TO HOLD SHORT PIECES BY
HAND!
26.
Never attempt to saw with the circular saw
held upside down in a vise. This is extremely
dangerous and can lead to serious accidents.
(
Fig. 7
)
27.
WARNING
:
Blade coasts to stop after switch
is released. Contact with coasting blade can
cause serious injury. Before setting the tool
down after completing a cut, be sure that the
lower (telescoping) guard has closed and the
blade has come to a complete stop.
28.
Do not stop the blades by lateral pressure on
the saw blade.
29.
Always use blades recommended in this manual. Do not use any abrasive or grinding
wheels.
30.
Wear a dust mask and hearing protection when use the tool.
31.
Some material contains chemicals which may be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING!
MISUSE or failure to follow the safety rules stated in this instruction manual
may cause serious personal injury.
Summary of Contents for ACS11-185
