PACKAGE CONTENTS
Light Fixture x 1
Solar Panel x 1
Mounting Plate x 1
Anchor x 8
Screw x 8
Read all instructions before installation, then store in a safe place for future reference. Failure to do so
may result in faulty assembly and potential injury.
SAFETY INFORMATION
• Your motion light is not a toy. Keep it out of reach from small children.
• You can mount your motion light indoors, but your solar panel must be installed outdoors to receive light from the sun.
• If using a step ladder, you may require a second person to help install the solar motion light.
• Prior to installation, lay out all components and check against the part list section in this manual.
• CAUTION! Never look directly into the solar motion light when illuminated.
CLEANING AND MAINTENANCE
• From time to time, ensure the plug between the solar panel and light is securely connected.
• It is advisable to adjust the angle of the solar panel to optimize the exposure of the sun during the winter months.
• The solar panel should be cleaned with a damp cotton cloth on a regular basis. This will ensure optimal
performance and battery charging. Periodically, utilize the same technique to clean the lenses of the motion lights.
• Never let any abrasive material come into contact with the solar panel.
•
To prolong the original appearance, clean the light fixture with a soft, damp cloth. Do not use paints, solvents, or other chemicals on this light
fixture. They could cause a premature deterioration of the finish.
LOCATION:
Fixture can be wall mounted.
Some environmental factors may affect the sensor range and could result in a reduction in sensor detection distance.
It is recommended not to mount the fixture near a heat source like an air conditioner, vent, or furnace exhaust, or in a direction facing a light
reflecting object.
D
E
A
B
C
SKU Number: 343-2419
Solar Powered LED Security Light
Model Number: ES00889G
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at
855-232-6423
Monday
– Friday 8:00 a.m. – 8:00 p.m. (EST)
1
