Assembly and operation instructions
SOLAR POWERED ENTRANCE LIGHT WITH MOTION SENSOR
READ AND FOLLOW ALL INSTRUCTIONS BEFORE OPERATING YOUR SOLAR LIGHT. SAVE THIS
MANUAL FOR FUTURE REFERENCE.
Models: 356-9134
Precautions (prior to first use)
Features
Assembly and operation
1. Choose a location that receives full, direct sunlight a
minimum of six hours a day and away from light sources
such as torch lights and streetlights, which can cause light
to turn off and flicker.
2. Secure the bracket to the wall. (See Figure 1)
a) For Wood Wall:
Attach the bracket to the desired wall location and screw
the drywall screws directly through the set holes of bracket
into the wall.
b) For Concrete Wall:
Attach the bracket to the desired wall location and mark the targets on the wall from the set holes of bracket
for drilling holes. Remove the bracket. Drill the holes and thread the anchors into the holes. Then reattach
the bracket back, and secure it by screwing the drywall screws into the anchors.
3. Ensure that battery is in place.
Note: Remove the insulated paper before using the light.
4. Switch the light to “OFF” using the switch on the rear of the fixture.
The light has three operating functions selectable by the switch:
- OFF: The light does not turn on.
- ON: The light stays on continuously.
- AUTO: The light operates at night, and illuminates for 60 seconds when motion is detected.
Page 1 / 3
1. To maximize battery capacity, the light should
be fully charged by direct sunlight for eight hours
before initial use.
2. Be sure battery is in secure contact with the
correct polarities.
3. Do not place light near light sources, as the
light may not work properly.
4. Under extremely cold temperatures, the battery
may not charge fully. In such cases, the light
may not stay illuminated as long.
1. No wiring required
2. Easy to install
3. Super Bright White LED Bulb (2x0.5W)
4. Rechargeable AA Ni-Mh battery (600mAh 1.2V)
5. Battery recharged by daylight using built-in
solar panel
6. Three different operation modes:
a.) OFF No light
b.) AUTO Use as a motion sensing light
c.) ON Light stays on continously
Drywall Screw
Keyhole
Anchor
Bracket
Key
Lock
Unlock
Fixture
Motion Sensor
Solar Panel
OFF
AUTO
ON
OFF
AUTO
ON
OFF
AUTO
ON
Drywall Screw
Screw
Battery Cover
Bracket
110607
Figure 1
Figure 3
Figure 2