The light does not come on at night:
Make sure solar panel is clean and free of dirt and debris. If needed use a damp cloth to clean the solar panel. Do not
use any chemical or abrasive cleaner. It is important to ensure that no moisture enters into the solar light.
TROUBLESHOOTING
Make sure pull plastic tag.
Check the rechargeable battery and make sure that it is in contact to the metal plate and the polarity is correct. If the
battery is worn out, replace the battery with a AA 600 mAh Ni-Mh rechargeable battery.
Always keep the solar light distant from other night light sources, such as exterior lights. Reposition the light to avoid
close contact with other night light sources.
ASSEMBLY AND BATTERY REPLACEMENT INSTRUCTIONS
ASSEMBLY (Ground and Wall Mounting Instructions)
NOTE:
Wall mounting hardware not included. Wall mount at your own risk. Certain exterior surfaces are not conducive to wall
mounting, including concrete, brick, stone, and certain siding types and attempting to screw into these surfaces may cause
damage to your home or business. Professional installation when wall mounting is advisable.
● Decide where you want to setup the solar powered address sign. Make sure that the sign is in direct sunlight and the numbers
are visible from the street. If hanging the address sign, be sure to choose a stable location either attached to the house or
another hard surface. If using the included ground stakes, make sure that the numbers are facing the street and the
numbers are clearly visible.
● For placing the address sign in the ground, find a unobstructed location to insert the ground stakes.
● Insert the stakes into the bottom of the sign. Secure into place.
● Insert the sign with stakes into the ground.
CAUTION: Do not push hard or damage to the sign may occur. If the ground is hard, first loosen the soil with a shovel
or trowel.
● For wall mounting the address sign, choose a secure, drillable surface.Locate the 2 screw mounting holes on the back of the s
ign. Accurately measure distance between the 2 holes. Using a pencil, ruler, and level, replicate the measurement on the wall,
making sure the 2 marks are level.
● Using a screwdriver or drill, screw 2 mounting screws into the wall.
● Once secured, mount the sign onto the screws.
● Your setup is now complete.
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-866-827-5104
Monday – Friday 7:00 a.m. – 5:00 p.m. CST
BATTERY INSTALLATION:
● Remove all contents from packaging.
● Locate the battery compartment on the bottom of the sign. Using a small screwdriver, remove the 4 screws and remove the
battery compartment cover.
● Insert the 1 rechargeable AA batteries according to the polarity diagram located inside the battery compartment. Once the
batteries have been inserted, replace the battery compartment cover and secure with the 4 screws. Do not overtighten.
