2 | P a g e
PATON
®
VDI SERIES MINI DC MMA
EC Declaration of Conformity
The following products have been tested by us with the listed
standards and found in compliance with the European Community
Low Voltage Directive 2014/35/EU and Electromagnetic
Compatibility Directive 2014/30/EU.
AUTHORISED
REPRESENTATIVE:
MASTERWELD Sp. z o.o., Poland
ul. Przemysłowa 14,
35 -105 Rzeszów Poland
Ust.ID. PL8133751525
MANUFACTURER
ADDRESS:
Limited Liability Company “Pilot Plant of Welding
Equipment of Electric Welding Institute named after
E.O. Paton”
Ukraine, 03045, Kyiv, 66 Novopyrohivska St.
PRODUCT:
INVERTER RECTIFIER
PATON VDI – 150 MINI DC MMA
The statement is based on a single evaluation of one sample of above mentioned products. It
does not imply an assessment of the whole production. The manufacturer should ensure that all
product in series production are in conformity with the product sample detailed in this report.
The applicant should hold the whole technical report at disposal of the competent all the right.
Applied EC Directives:
2014/35/EU (Low Voltage)
2014/30/EU (Electromagnetic Compatibility)
Applied Standards:
EN 60204-1:2006. Safety of machinery - Electrical equipment of
machines – Part 1: General requirements; EN 60974-1:2012 Are
welding equipment – Part 1: Welding power sources; EN 60974-
10:2014 Are welding equipment – Part 10: Electromagnetic
compatibility (EMC) – requirements.
Issued Date:
12 September 2017
Expiry Date:
11 September 2022
General Manager
We, MASTERWELD Sp. z o. o., hereby declare that specified above conforms covering
European
Parliament
and
Council
Directives,
2014/35/EC
Low
Voltage
Directive
of
26
February 2014 and 2014/30/EU Electromagnetic Compatibility of 26 February 2014.
The CE mark above can be used under the responsibility of manufacturer. After completion of an EC
declaration of conformity and compliance with all relevant EU Directives.
