PATON
StandardMIG
DC MMA/TIG/MIG/MAG
- 70 -
ENGLISH
CONTENTS
1. General provisions
72
2. Commissioning
75
2.1 Intended use
75
2.2 Placement requirements
75
2.3 Mains connection
76
2.4 Connection of the mains plug
76
3. Manual arc welding with a stick electrode (MMA)
77
3.1 Welding process cycle - MMA
77
3.2 HOT-START function
77
3.3 ARC-FORCE function
78
3.4 ANTI-STICK function
79
3.5 Slope control function of the voltammetric characteristic
79
3.6 Short arc welding function
80
3.7 No-loading voltage reduction unit function
80
3.8 Pulsed current welding function
80
4. Tungsten-arc inert-gas welding (TIG)
81
4.1 Welding process cycle
–
TIG-LIFT
82
4.2 TIG-LIFT arc ignition function
82
4.3 Welding current ramp function
83
4.4 Pulsed current welding function
83
5. Semi-automatic welding (MIG/MAG)
84
5.1 Welding process cycle - MIG/MAG - 2T
86
5.1.1 Button function on the torch - 2T
86
5.2 Welding process cycle - MIG/MAG - 4T
87
5.2.1 Button function on the torch - 4T and alt
. 4Т
87
5.3 Inductance function
88
5.4 Pre-purge function with safety gas
88
5.5 Post-purge function with safety gas
88
5.6 Voltage/speed ramp function at the start of welding
88
5.7 End-of-welding voltage/speed decay function
89
5.8 Pulsed voltage welding function
89
5.9 Motor switch-off function
90
6. Selecting and configuring machine functions
90
6.1 Switching to the required function
91
6.2 Switching to the required welding mode
91
6.3 Resetting all functions of the current welding mode
91
6.4 Changing the program number in the current welding mode
91
7. General list and sequence of functions
92
8. Generator operation mode
94
9. Service and maintenance
95
10. Storage regulations
95
11. Transportation
95
12. Scope of delivery
95
13. Safety instructions
96
14. Warranty obligations
100
