Paton MultiPRO-250, User Manual

Page: 18 / 26

PATON MultiPRO DC MMA/TIG/MIG/MAG
-18 -
Used MMA electrode
Set current value for
MMA and TIG
Wire cross-section
diameter for MIG/MAG
Cross-section of each
core of the mains wire,
sq. mm
Max. wire
length, m
3 x 380/400V – MultiPRO-270-400V, MultiPRO-350-400V
Ø 2 mm no more than 80А no more than Ø 0,6 mm
1,0 135
1,5 205
2 270
2,5 340
4 540
Ø 3 mm no more than 120А no more than Ø 0,8 mm
1,5 135
2 175
2,5 220
4 350
6 525
Ø 4 mm no more than 160А
no more than Ø 1,0 mm
2 130
2,5 160
4 260
6 385
Ø5 mm no more than 220А
2,5 115
4 180
6 270
Ø 6 mm fusible no more than 270А no more than Ø 1,2 mm
2,5 85
4 135
6 205
Ø 6 mm up to 350А no more than Ø 1,4 mm
2,5 65
4 100
6 150
ATTENTION! Supply button on the rear panel of the machine (for MultiPRO-250) is not a power button, so it does not provide complete
de‐energization of internal electronic parts, when the machine is switched off. Therefore, in accordance with safety rules, d isconnect
the plug from the mains after completion of welding.
MACHINE CONNECTION DIAGRAM FOR WELDING WITH STICK ELECTRODES (MMA)