Patlite WD PRO Series Page 29 Instruction Manual Download

Page: 29 / 63

Wireless Data Communication System - WD PRO Series Instruction Manual

7. Operation

7.1.1.3 When Not Using the RS-232C Cable

Body

Direct Mount

Bracket

Cable gland

❷

❸

❺

❻

❹

❶❼

(accessory)

Cap

Sealing plug

In the mounting location, drill holes for mounting

and wiring the product.

❶

Rotate the body counterclockwise and detach

from the direct mount bracket.

❷

Apply the sealing plug and cap to the cable

gland, and rotate the cap clockwise to attach.

❸

Use nuts to secure the direct mount bracket in

the mounting position.

❹

Pass the wires (gray or black) through the wire

distribution hole.

❺

Attach the body to the direct mount bracket,

reversing the steps for detaching.

❻

If required, apply sealant around the mounting

and wire distribution holes.

❼

* When the sealing plug pops out of the cap, use your hand

to push the sealing plug back in.

Recommended Torque

0.6 N•m (approximate)

Recommended Torque

0.6 N•m (approximate)

☞ Mounting Hole Dimension Diagram(P.25)

* When using a pole bracket and pole, drilling holes is

unnecessary.

☞ 7.1.2 Replacing Mounting Bolts (M4 → M3) on the

Main Unit(P.31)

* Do not secure when using a pole bracket and pole.

* This illustration presents an overview of installation and

does not reflect the installation status at each step.

*Maximum board

thickness: 7 mm

* When using a pole bracket and pole, refer to “7.1.1.4

Wiring Method When Using Pole Bracket and Pole

(Accessories)(☞P.30)”.

Summary of Contents for WD PRO Series
































































Search results

Summary of Contents for WD PRO Series

Reviews:

Related manuals for WD PRO Series

Brands by name

Popular brands

Patlite WD PRO Series, Instruction Manual

Search results

Summary of Contents for WD PRO Series

Reviews:

Related manuals for WD PRO Series

Brands by name

Popular brands