MODEL 7183 DUAL CHANNEL BJ80 BNC A/B/OFFLINE SWITCH WITH SECURE EHTERNET REMOTE
Electro Standards Laboratories, Inc.
(401) 943-1164
www.electrostandards.com - pg 11 - Pub. 5847-01
Error conditions not covered in Table 2:
•
Issuing a command not found in Table 2 will respond with the
error message: “Invalid Command.” and no switching will occur.
Whenever a front panel pushbutton operation takes place, the new
status will automatically be sent to the SSH session when logged in.
When the unit sends automatic updates, they will be in the same format
as the response for the CTRL-P command.
Switch Position on Power Down
If power to the Model 7183 is lost, the switch will maintain its present
position and continue to pass data. Upon power restore, the unit will
remain in the position it was in at power down.
