®
I n s tr u c t i o n S he e t
0 1 2 - 1 0 2 9 0 A
AirLink Replacement Battery
PS-2566
Introduction
PASCO model PS-2566 is a replacement battery for the
PASPORT AirLink SI.
To replace the battery, you will need to open your AirLink and
connect the new battery to the circuit board. If you would prefer
to send your AirLink back to PASCO to have the battery
replaced, contact PASCO by phone or email (see Technical Sup-
port on page 3).
What You Will Need
To replace the battery, you will need the following items.
•
AirLink Replacement Battery (PASCO model PS-2566)
•
AirLink SI (PASCO model PS-2005)
•
T5 Torx driver
Replacing the Battery
Important: Before proceeding, take precautions to avoid static discharge,
which may damage the AirLink. Touch something metal and grounded
before handling the AirLink circuit board.
Opening the AirLink
1.
Using a T5 Torx driver, remove the two screws from the bot-
tom half of the AirLink enclosure.
2.
Firmly pull apart the halves of the enclosure. As you open
the AirLink, the circuit board will separate from the top half
of the enclosure.
remove screws
