®
Reference Guide
013-14074A
Spectrometer
PS-2600
+1 916 786 3800
Also Required
Software for Computer or Tablet
PASCO Spectrometry
Available free for Mac, PC, iOS, and Android* devices at
the PASCO web site:
www.pasco.com/spectrometer
*NOTE: The Android tablet needs Bluetooth capability.
Software: Other Sources
The PASCO Spectrometry software is also available from the
Apple App Store and from Google play.
Initial Step: Charge the Battery
The PASCO Spectrometer is partially charged at the factory. The
PASCO Spectrometer battery is charged using the USB cable
connected to a USB port or USB charger. Let the Spectrometer be
connected for at least four hours before use. Leave the
Spectrometer off while charging. As the battery is charging, the
Battery Status LED (light-emitting diode) will blink red. When
the battery is fully charged, the Battery Status LED shines green.
The charger circuit inside the unit turns itself off when the unit is
fully charged, so it can’t be overcharged.
Cuvette and Lid (10)
Left End
Reset Button Access
Right End
USB
Port
ON/OFF
Button
Battery Status LED
Bluetooth Status LED
USB Status LED
Bottom
Bluetooth
ID# Label
Drain
Ports
Cuvette Holder
Light Path
Top
Included Equipment
Part Number
Spectrometer
PS-2600
Cuvette and Lid (10)
USB Cable
PS-2538
Optional Equipment
Fiber Optic Probe
PS-2601
