®
PS-2132
The PS-2132 Charge Sensor measures charge (in Coulombs) and voltage (in volts).
Charge Sensor Quick Start
Additional Equipment Needed
•
PASPORT
TM
USB interface [USB Link (PS-2100), Xplorer (PS-2000), or a Power-
Link (PS-2001)]
•
EZscreen or DataStudio
®
software (version 1.7.2 or later)
Equipment Setup
1. Connect the PASPORT interface to a USB port on your computer or to a USB hub.
2. Connect the input cable to the receptacle on the Charge Sensor.
3. Connect the 9-pin connector on the Charge Sensor to a PASPORT interface.
4. The software launches when it detects a PASPORT sensor. Select a choice from the
PASPORTAL window.
Sensor Specifications:
Sensor Range:
±
0.1
µ
C or
±
10 V
Resolution:
500
µ
V, 5.0 pC
Input Resistance:
10
12
ohms
Input Capacitance:
0.01
µ
F
±
5%
Input Cable:
0.9 m length, shielded
Maximum Input Voltage:
±
150 volts dc, continuous
800-772-8700 • 916-786-3800 • [email protected] • www.pasco.com
012-08282A
1
2
3
Charge Sensor
Zero button
4
