background image

 

 

Product Manual 

 

 

012-16501A 

 

800-772-8700

 

 

www.pasco.com

 

Smart Cart Vector Display 

ME-1246 

 

 

 

Product Summary 

The Smart Cart Vector Display adds visual vectors to a 

Smart Cart

1

  for  force,  acceleration,  and  velocity. 

Arrows light up proportional to the sensor reading 

showing either positive or negative direction and 

magnitude. 

Included Equipment 

1  Smart Cart Vector Display 

 

2  Micro USB cable 

For connecting the accessory to a USB charger. 

3  Smart Cart Accessory Cable 

For connecting the accessory to a Smart Cart.

 

 

Required Equipment 

The following table lists the equipment required to perform 

experiments with the Smart Cart Vector Display. Only one 

of the options provided for each item is required. 

Item 

Options 

Smart Cart 

ME-1240 Smart Cart (Red) 

 

ME-1241 Smart Cart (Blue) 

Software 

PASCO Capstone 

 

SPARKvue 

 

 

                                                      

1

 U.S. Patent 10,481,173, issued 2019. 

Summary of Contents for ME-1246

Page 1: ...tude Included Equipment 1 Smart Cart Vector Display 2 Micro USB cable For connecting the accessory to a USB charger 3 Smart Cart Accessory Cable For connecting the accessory to a Smart Cart Required Equipment The following table lists the equipment required to perform experiments with the Smart Cart Vector Display Only one of the options provided for each item is required Item Options Smart Cart M...

Page 2: ...ur PASCO data collection software 3 Update the firmware of your Smart Cart Charge the battery 1 Connect the USB cable to the USB port on the accessory Connect the other end of the cable to a USB charger or port 2 Keep the device connected to the charger until the battery is fully charged Tip The device can remain connected to the charger when the battery is fully charged Update PASCO data collecti...

Page 3: ... Cart in an upright left and flat right position Change the displayed measurement Use PASCO Capstone or SPARKvue to select a Smart Cart measurement to display Use the software to also adjust the range and sign of the measurement Before performing these steps be sure that The Smart Cart is connected to the software The accessory is connected to the Smart Cart 1 In the Tools palette go to the Vector...

Page 4: ...an health and the environment To find out where you can drop off your waste equipment for recycling please contact your local waste recycle disposal service or the place where you purchased the product The European Union WEEE Waste Electronic and Electrical Equipment symbol to the right and on the product or its packaging indicates that this product must not be disposed of in a standard waste cont...

Reviews: