Bartendro
TM
B15
-9-
Step 8
Spout Fine Tuning
Remove the spout by pulling straight
down on it. Take care to not move it
sideways before reaching the bottom of
the tubing separator or you may cause
damage.
Pull the tubes from the spout bracket
straight down so that they go through the
lower tubing separator. It may be easiest
to pull the inner tubes (dispenser 4, 5, 10,
12, 14) down first.
The tubes should protrude from the
bottom by about 1/4”.
Return the spout by pushing it straight
up into the bracket. Tighten or loosen the
grip on the spout by adjusting the two
screws.
Adjustment
Screws
