The password option allows user to set or clear the raid subsystem’s
password protection feature. Once the password has been set, the user can
only monitor and configure the raid subsystem by providing the correct password.
The password is used to protect the internal RAID subsystem from
unauthorized entry. The controller will check the password only when
entering the Main menu from the initial screen. The RAID subsystem will
automatically go back to the initial screen when it does not receive any
command in ten seconds.
To disable the password, press the
Enter
key only in both the
Enter New
Password
and
Re-Enter New Password
column. Once the user confirms
the operation and clicks the
Submit
button. The existing password will be
cleared. No password checking will occur when entering the main menu from
the starting screen. If a password is lost please contact Partners data Systems
to reset your password to default.
3.9.10 Upgrade Firmware
Please reference the section 4.2 for more information.
