Terminal Port Configuration:
Speed setting values are 1200, 2400, 4800, 9600, 19200, 38400, 57600, and
115200.
Stop Bits values are 1 bit and 2 bits.
Note: Parity value is fixed at None.
Data Bits value is fixed at 8 bits.
JBOD/RAID Configuration
The RAID subsystem supports JBOD and RAID configuration.
Maximum SATA Mode Supported:
The 16 SATA drive channel can support up to SATA ll, which runs up to 300MB/s.
NCQ is a command protocol in Serial ATA that can only be implemented on native
Serial ATA hard drives. It allows multiple commands to be outstanding within a
drive at the same time. Drives that support NCQ have an internal queue where
outstanding commands can be dynamically rescheduled or re-ordered, along with
the necessary tracking mechanisms for outstanding and completed portions of
the workload. RAID subsystem allows user to choose the SATA Mode: SATA150,
NCQ, SAT300, NCQ.
HDD Read-Ahead Cache:
This option allows the users to disable the cache of the HDDs on the RAID
subsystem. To some HDD models, disabling the cache in the HDD is
necessary to prove the RAID subsystem functions correctly.
Stagger Power-On Control:
This option allows the power supplier to power up in order each HDD on the
RAID subsystem. In the past, all the HDDs on the RAID subsystem are
powered up altogether at the same time. The power transfer time (lag time)
from the last HDD to the next one can be set within the range of 0.4 to 6.0.
