Particulate Systems NanoPlus, Operator'S Manual, Page: 34 / 252

SOP Designer NanoPlus Operator’s Manual
3-14 Mar 2014
Table 3-1. Print Dialog Options for Particle Size Data
Selection Description
1st Figure Select from Intensity Distribution, Volume Distribution, and
Number Distribution. The item selected for the 1st figure is
printed on the same sheet of paper with the 2nd figure and the
Distribution Table (if selected).
2nd Figure
Select ACF or Ln(G1(

)) vs

Plot. The item selected for the
2nd figure is printed on the same sheet of paper with the 1st
figure and the Distribution Table (if selected).
Distribution Table Prints the population distribution data selected in the 1st figure,
together with the 1st figure and a 2nd figure.
1/4 Scale Distribution Plot Prints on a single sheet of paper the Intensity Distribution, the
Volume Distribution, the Number Distribution, and Ln(G1(

))
vs

Plot.
Ln(G1(

)) vs

Plot
Prints a first-order autocorrelation logarithmic display.
G2(

) vs

Plot Prints a second-order autocorrelation function.
Realtime Size Monitor Prints a plot of the particle size values for each integration
cycle being calculated.
Realtime Size Table Prints a table of the particle size values for each integration
cycle being calculated.
Size Dist. Table Prints distribution frequency tables for the intensity
distribution, volume distribution, and number distribution.
Cumulative Size Dist. Table Prints cumulative frequency tables for the intensity
distribution, volume distribution, and number distribution.
ACF Listing Prints tables of the first-order and second-order autocorrelation
functions.
Condition Summary Displays the measurement parameters, analysis parameters,
cell parameters, and diluent properties extracted from the SOP
parameters.
Temperataure Gradient Plot Prints a plot of the temperature gradients for the analysis.
Prints all opened data Prints all data open in the Results pane.
Examples and additional information about reports are provided in Appendix D.