Parsun F40 EFI, Maintenance Manual

Page: 22 / 119

17
Basic maintenance
Maintenance Interval Chart
Project Content
Initial maintenance
General
maintenance
interval
10 hours
(1 month)
50 hours
(3
months)
100
hours
(6
months)
200
hours
(1 year)
Anode Check/replace
○ ○
Anode (internal) Check/replace
○
Cooling water
channel
Clean
○ ○
Spark plug Clean/adjust/replace
○ ○
Grease filling point Add grease
○
Fuel filter Check/replace
○ ○ ○
Fuel system Check
○ ○ ○
Fuel tank Check/clean
○
Idle speed Check/adjust
○ ○
Engine oil Replace
○ ○
Oil filter Replace
○
Valve clearance
(OHC)
Check/adjust
○ ○
Ignition timing Check
○ ○
Thermostat Check
○
Gear oil Replace
○ ○
Water pump Check
○
Propeller and cotter
pin
Check/replace
○ ○
Timing belt Check/replace
○ ○
Throttle cable Check/adjust
○
Shift lever/shift
cable
Check/adjust
○
Note:
Flush the outboard motor with fresh water immediately after running in salt water,
sewage or muddy water.
If leaded gasoline is used frequently, check the valve and related parts every 100
hours.
Warning:
The timing belt needs to be replaced every 1000 hours (5 years); Avoid engine damage
or injury accident caused by sudden fracture of timing belt due to aging.
Fuel system
1. Check the fuel tank, fuel pump and fuel pipe.
Check the fuel tank, fuel pump and fuel pipe for leakage or damage, and replace them if
necessary.
Check the fuel filter core on the fuel tank for dirt, and clean or replace it if necessary.