Golden Retriever Installation Instructions
Page 11 of 19
Final Assembly
Step 1: Make sure all the cables and devices are properly connected.
A.
Inspect every cable connection and ensure that no connections are loose.
B.
Use cable ties or other wire management to neatly bundle the cables. Pack the cables neatly
inside the bottom half of the case.
Ensure that the antenna cables are not excessively bent (1/2”
minimum bend radius). For the Golden Retriever G, ensure that no antenna cables are
running across the top of the router.
Figure 9: Fully Connected 5in1 Golden Retriever A with Cradlepoint IBR900 Router