Parry
-British Built for Purpose
IN167-5
4
Installation Instructions
THIS APPLIANCE MUST BE FITTED BY A QUALIFIED ELECTRICIAN, IN ACCORDANCE WITH
CURRENT REGULATIONS.
Please ensure the unit is sited in a position that doesn’t obstruct any of the ventilation
holes. We would advise that the unit should be positioned 6 inches away from any
combustible material. The castors should be locked before operating the unit.
Electrical connection
Remove the side panel to gain access to the terminal block.
Feed electricity supply cable through the cable gland fitted at the rear of the appliance.
Connect cable up to the terminal block as shown.
Replace the side panel.
Connect the supply cable to an isolator switch.
