ANAFI
40
SeeThrough Mode
The user has direct access to SeeThrough mode via the bottom button of the
Parrot
Cockpitglasses 3.
SeeThrough mode gives the user a live view of the surroundings via the terminal's camera.
Parrot recommends that you use the SeeThrough mode when your drone is taking off, in
order to have a better display of the scene.
When your drone is flying and the GPS of your drone is recognised and is located more
than 10 m from the user, a brightly-coloured widget icon marks its location and direction
in augmented reality.
P
REFERENCES
Access
FreeFlight 6
preferences through the icon on the extreme right of the top bar of the
homepage, or that of the HUD. Preferences enable you to fine-tune
ANAFI
to your hand
–
to
customize it, to fit your piloting and filming styles.
Access
Preferences
submenus from the boxes on the left of the screen. Tap a box to select it
and access its items.
For all items,
default values
(DV)
are marked in
bold characters
.
Interface
The Interface preferences set the way your controller behaves and the amount of
information you want on your
FreeFlight 6
HUD
. It also enables you to activate the “Hand
-
launch” option.
The interface preferences allow you to adjust the behaviour of the controller. They also allow you to
activate the "launched take-off" function.
Tap an item option to select it.
-
Control mode:
DEFAULT
/ SPECIAL (refer to diagrams for control details)
-
Inverse joys
OFF
(white) / ON (green)
-
Show minimap
NEVER / WITH CONTROLLER /
ALWAYS
-
Map type
ROADMAD / SATELLITE /
HYBRID
-
Hand-launch
NO /
YES
-
Show framing grid
NO
/ 3x3 / 6x6
-
Measurement system
AUTO
/ IMPERIAL / METRIC
The EV Trigger, if selected, allows the user to control the EV directly from the Parrot
Skycontroller 3. The zoom trigger (see the "PARROT SKYCONTROLLER 3 PRESENTATION -
Camera and Platform Control" paragraph) then becomes the EV trigger. The user can
manually modify the EV (between the values of -3.0 and +3.0, in increments of 0.3), which
will automatically change the shutter speed(s) between 1/100 and 1/25.Touch "Reset
Interface Settings" to restore the default values for this menu.
