F62
2
2
Installation & Operating Instructions for the
Parrotuncle Owner’s Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
NOTE:
The important safety precautions and instructions appearing in the manual are not meant to cover all possible conditions and
situations that may occur. It must be understood that common sense and caution are necessary factors in the installation and operation of
this fan.
NOTE:
This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities are different or
are impaired, or lack of experience or knowledge, unless such persons are supervised or trained to operate the appliance by a person responsible
for their safety.
NOTE:
Children should be supervised to ensure that they do not use appliances as a toy.
TECHNICAL INFORMATION
THANK YOU FOR YOUR PURCHASE
Thank you for purchasing this quality product. To ensure correct function and safety, please read and save all instructions before
using the product
SAFETY TIP
1.
To avoid possible electric shock, turn off the electricity at the main fuse box or circuit panel before you begin the fan installation or before
servicing the fan or installing accessories.
2.
Read all instructions and safety information carefully before installing your fan and save these instructions.
3.
Make sure all electrical connections comply with local codes or ordinances and the National Electrical Code. If you are unfamiliar with
electric wiring, please use a qualified and licensed electrician.
4.
Make sure you have a location selected for your fan that allow clear space for the blades to rotate, and at least seven
(7) feet
of clearance
between the floor and the fan blade tips. The fan should be mounted at least thirty (30) inches from walls or other upright structures.
5.
WARNING:
The outlet box and ceiling support joist used must be securely mounted, and capable of supporting at least
100 pounds
. To
reduce the risk of fire, electric shock or personal injury, mount to the outlet box marked acceptable for fan supported and use mounting
screws provided with the outlet box. The box must be supported directly by the building structure.
6.
WARNING:
To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “acceptable for fan support” and use
mounting screws provided with the outlet box most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan
support and may need to be replaced. Consult a qualified electrician if in doubt.
7.
Electrical diagrams are for reference only. Light kits that are not packed with the fan must
UL
listed and marked suitable for use with the
model fan you are installing. Switches must be
UL
. general use switches. Refer to the instructions packaged with the light kits and switches
for proper assembly.
8.
After installation is complete, check that all connections are absolutely secure.
9.
After making electrical connections, spliced conductors should be turned upward and pushed carefully up into outlet box. The wires
should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.
10.
WARNING:
To reduce the risk of electrical shock and fire, do not use this fan with any solid-state fan speed control device, or rheostat.
11.
Do not separate the reverse switch until the fan has come to a complete stop.
12.
Do not insert anything into the fan blades while they are rotating.
13.
WARNING:
To reduce the risk of personal injury, do not bend the blade brackets (also referred to as “flanges”) during assembly or after
installation. Do not insert objects in the path of the blades.
14.
To avoid personal injury or damage to the fan and other items, be cautious when
working around or cleaning the fan.
15. Do not use water or detergent when cleaning the fan or fan blades. A dry dust cloth orlightly dampened cloth will be suitable for most cleaning.
SKU
Rated Voltage
Rated power(motor)
Light
F622
2
110-120 VAC
55W
3×E12 MaX.
40
W (EXCLUDE)
