Parkside PMS 160 C2, Translation Of The Original Instructions, Page: 29 / 126

29
GB
Trouble Shooting
Problem Possible Cause Error correction
Device doesn‘t start
Mains voltage missing
Main circuit breaker is
tripped
Check the socket, mains cable, line,
mains plug, repairs to be carried out
by qualified electrician if necessary,
check main circuit breaker.
On/off switch (1) may be
defective
Repair by Customer Care
Motor faulty
Device works with
interruptions
Internal loose contact
Repair by Customer Care
On/off switch (1) is broken
Motor is slowing
down and stops Device is overloaded
through workpiece
Reduce pressure on sander
Workpiece unsuitable
Poor grinding
performance
Sanding sheet (9) unsuit-
able for the workpiece to
be processed Use a suitable sanding sheet
(9) or sanding disc (see “Assem-
bling instructions”)
Worn sanding sheet
Insert a new sanding sheet
(see “Assembling instructions”)
Sanding sheet
(9) wears down
quickly
Sanding sheet (9) unsuit-
able for the workpiece to
be processed
Use a suitable sanding sheet
(9)(see “Assembling instructions”)
Too much pressure applied Reduce the pressure