Parkside PAH 1700 C4, Operation And Safety Notes, Page: 22 / 133

21 GB/IE
Any other use or modification of the product
are considered improper use and can result in
hazards such as death, life-threatening injuries
and damage. The manufacturer is not liable
for any damages caused by improper use. The
product is exclusively intended for domestic use.
The product is not intended for commercial use or
for similar uses.
Observe all applicable local safety regulations,
standards and ordinances. The use of noise
emitting power tools may be restricted to certain
times by national or local regulations.
z Scope of delivery
m
WARNING!
X
The product and the packaging are not
children’s toys! Children must not play with
plastic bags, sheets and small parts! There
is a danger of choking and suffocation!
1x Demolition hammer PAH 1700 C4
1x Auxiliary handle (pre-assembled)
1x Flat
chisel
1x Pointed chisel
2x Carbon brushes (= 1 pair)
1x Grease bag (50 g)
1x Hex key (3 mm)
1x Instruction
manual
1x Carrying case
z Parts description
Figure A:
1 Grease cap
2 On/off switch
3 Main handle
4 Speed dial
5 Power cord with power plug
(Power plug not illustrated)
6 Auxiliary handle
7 Auxiliary handle knob
8 Adjustment collar
9 Locking collar
10 Dust cap
11 Chisel holder
12 Flat chisel
13 Pointed chisel
14 Grease
15 Hex key (3 mm)
16 Carbon brush (x2)
Not illustrated:
17 Carrying case
z Technical data
Demolition hammer PAH 1700 C4
Rated input voltage : 230–240 V
~
,
50 Hz
Input power : 1700 W
Protection class : II/
Stroke rate : 200–2100 min –1
Stroke energy : 50 joule
Chisel assembly : Toolless
Chisel adjustment : 12 positions
Noise emission value
The measured values have been determined in
accordance with EN 60745. The A-rated noise
level of the power tool is typically as follows:
Sound pressure level
L
pA
: 91.5 dB(A)
Uncertainty K
pA
: 3 dB
Sound power level L
WA
: 103.0 dB(A)
Uncertainty K
WA
: 2.40 dB
Sound power level,
guaranteed
L
WA
: 105 dB(A)
(L
WA
is measured according to outdoor
noise emission directives 2000/14/EC and
2005/88/EC)
Vibration emission value
Vibration total values (triaxial vector sum)
determined according to EN 60745:
Chiselling:
Vibration emission
value a
h, Cheq
: 20.686 m/s 2
Uncertainty K : 1.5 m/s 2