Parkside 398461 2104, Translation Of The Original Instructions

Page: 9 / 179

PWSA 20-Li C3
GB
│
IE
│ 3 ■
Package contents
1 cordless angle grinder
1 additional handle
1 blade guard (pre-assembled)
1 two-hole mounting spanner
1 cutting disc (pre-assembled)
1 set of operating instructions
Technical details
Cordless angle grinder PWSA 20-Li C3
Rated voltage 20 V (DC)
Rated idle speed n 2500–10000 rpm
Disc width Ø 125 mm
Thread size M14
Battery PAP 20 A3*
Type LITHIUM ION
Rated voltage 20 V (DC)
Capacity 4 Ah
Cells 10
High-speed battery charger PLG 20 A3*
INPUT
Rated voltage 230–240 V ~,
50 Hz (AC)
Rated power consumption 120 W
Fuse (internal) 3.15 A
T3.15A
OUTPUT
Rated voltage 21.5 V (DC)
Rated current 4.5 A
Charging time approx. 60 min
Protection class II / (double insulation)
* BATTERY AND CHARGER ARE NOT INCLUDED
Noise and vibration data
Noise measurement value determined in accord-
ance with EN 60745. The A-rated noise level of
the power tool is typically:
Noise emission value
Sound pressure level L
PA
= 83 dB(A)
Uncertainty K = 3 dB
Sound power level L
WA
= 94 dB(A)
Uncertainty K = 3 dB
Wear ear muffs!
Total vibration value
Surface grinding
main handle
a
h, AG
= 2.698 m/s 2
Uncertainty K = 1.5 m/s 2
Surface grinding
Additional handle
a
h, AG
= 3.284 m/s 2
Uncertainty K = 1.5 m/s 2
NOTE
► The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure and can
be used for equipment comparisons. The
specified vibration emission value can also
be used to make an initial exposure estimate.
WARNING!
► The vibration level varies depending on the
use of the power tool and may be higher
than the value specified in these instructions
in some cases. Regular use of the power tool
in this way may cause the user to underesti-
mate the vibration. Try to keep the vibration
loads as low as possible. Measures to reduce
the vibration load are, e.g. wearing gloves
and limiting the working time. Wherein all
states of operation must be included (e.g.
times when the power tool is switched off and
times where the power tool is switched on but
running without load).