Parkside 325296 2001, Operation And Safety Notes

Page: 12 / 64

12 GB
˜
Using as a LED light
Fully charge the product as described in the
section “Charging the product“ .
The product can be operated in 4 different
modes . Select these by repeatedly pressing
the ON/OFF switch
[ 2]
.
ON/OFF
switch
Mode
Press 1x: The white light lights up at maximum
mode .
Press 2x: The white light lights up at
Eco mode .
Press 3x: SOS blinking (white light)
Press 4x: Red light blinking
ATTENTION!
The flashing red
light can have adverse effects
on the health of predisposed
individuals!
The flashing light is not suitable
as a traffic warning light .
Press 5x: Switch off the light .
˜
Using as a charger
When used with the USB cable
[ 13]
, the product
may be used to charge small electronics devices
with USB socket (type C) for charging (e .g .
mobiles or digital cameras) .
Please note, the charging current the device
requires may not exceed 2 A . Carefully read
the instructions for use of the device you wish
to charge .
ATTENTION! Charging a device which requires
a higher charging current may cause a defect in
both devices .
Also note, the battery of the device you wish
to charge must have a significantly smaller
capacity than the total capacities of the
rechargeable batteries inside the product
(6000 mAh) . Otherwise charging may not
complete .
Open the protective cap
[ 8]
.
Insert the USB plug of the USB cable
[ 13]
into
the USB output socket
[ 10]
.
Insert the USB plug (type C) of the USB cable
[ 13]
into the small electronic devices you wish
to charge . The green charging indicator
[ 6]
lights up, indicating the battery capacity .
Remove the USB cable
[ 13]
as soon as
charging is complete .
Close the protective cap
[ 8]
.
˜
Maintenance and cleaning
The product requires no maintenance . The LEDs
cannot be replaced .
Switch off the product and disconnect the
power adaptor from socket or unplug the car
charger adaptor
[ 12]
from the 12 V socket
before cleaning .
Close the protective cap
[ 8]
on the USB input
socket
[ 9]
and USB output socket
[ 10]
.
Never immerse the product in water or other
liquids .
Never use caustic cleaners .
Regularly clean the product with a dry, lint-
free cloth . Use a slightly moist cloth to remove
any stubborn dirt .