Parkside 325296 2001, Operation And Safety Notes

Page: 10 / 64

10 GB
Risk of leakage of batteries /
rechargeable batteries
Avoid extreme environmental conditions and
temperatures, which could affect batteries /
rechargeable batteries, e .g . radiators / direct
sunlight .
If batteries / rechargeable batteries have
leaked, avoid contact with skin, eyes and
mucous membranes with the chemicals! Flush
immediately the affected areas with fresh
water and seek medical attention!
WEAR PROTECTIVE GLOVES!
Leaked or damaged batteries /
rechargeable batteries can cause
burns on contact with the skin . Wear
suitable protective gloves at all times if
such an event occurs .
This product has a built-in rechargeable
battery which cannot be replaced by the
user . The removal or replacement of the
rechargeable battery may only be carried out
by the manufacturer or his customer service
or by a similarly qualified person in order
to avoid hazards . When disposing of the
product, it should be noted that this product
contains a rechargeable battery .
˜
Before use
˜
Charging the product
NOTES:
Remove all packaging materials from the
product .
You can charge the product by means of
the supplied power adaptor to a normal
household socket, or by means of the
supplied car adaptor to a 12 V car cigarette
lighter socket .
The fuse of the car charger adaptor
[ 12]
can
be exchanged .
The technical data of the fuse must comply
with information given in the section
“Technical data” . The fuse may only be
replaced by a qualified electrician .
CAUTION! Do not connect the product to your
car‘s 12 V connection if the car battery is already
old and worn . Doing so could mean that the car
engine will no longer start .
NOTES:
In order to use the product without a
USB cable
[ 13]
, you need to recharge the
rechargeable battery before use . The
charging process takes about 3 .5 hours . The
rechargeable battery is firmly integrated into
the base of the product .
Fully charge the rechargeable battery prior
to first use .
Charge the battery if it becomes empty
(only 1 LED of the charging indicator
[ 6]
is
flashing) .
Open the protective cap
[ 8]
.
Connect the USB cable
[ 13]
with the
USB connector of the power adaptor
[ 11]
or
the car charger adaptor
[ 12]
.
Connect the USB plug (type C) of the
USB cable
[ 13]
to the USB input socket
(type C)
[ 9]
on the product .
Plug the power adaptor
[ 11]
into a socket,
or plug the car charger adaptor
[ 12]
into the
12 V socket in your vehicle .