18 GB
Removing the saw blade
(Fig . G)
¾
Turn the chuck ring 2 in a counter-clockwise
direction .
¾
Pull the saw blade out of the saw blade
holder 3 .
¾
Release the chuck ring 2 and let it return to
its original position .
NOTE
u
For certain work, the saw blade can also
be inserted after turning through 180° .
Switching on and off
m
CAUTION! RISK OF INJURY!
Always wear protective gloves when
handling or working with the product .
m
CAUTION! RISK OF INJURY!
u
Before switching on the product: Ensure
the saw blade is not in contact with the
workpiece .
u
Ensure your stance is stable . Always hold
the product’s front 9 and rear handle
7 firmly with both hands while working
(Fig . H) .
u
Keep your hands away from the saw
blade when the product is in operation .
NOTE
u
The on/off switch 6 cannot be locked .
(Fig . I)
¾
Switching on:
Release the switch lock 5
by pushing it in on the left or right side .
Press and hold the on/off switch 6 .
Regulate the speed as required (see “Speed
control”) .
¾
Switching off:
Release the on/off switch
6 .
When releasing the on/off switch, the switch
lock 5 moves back into its original position .
Speed control
¾
By using the on/off switch 6 , you can
progressively control the speed:
Pressure
Speed
Gentle pressure:
Lower speed
Greater pressure:
Higher speed
LED work light
This product is equipped with a LED work light
10 to illuminate the immediate working area to
improve visibility in poorly lit areas .
¾
The LED work light 10 lights up automatically
as soon as the product is switched on .
NOTE
u
The LED work light 10 stays on for an
additional approx . 10 seconds after
switching off the product .
Summary of Contents for PSSAP 20-Li B2
