54
STEP 3.
Pull the hose clamp through the holes on the sides of the pole mount holder.
STEP 4.
Wrap the desired spot on the pole with the hose clamp and use the
screwdriver to tighten the hose clamp.
6.2.5. Power Connector
The supply circuit must have an all-pole mains switch (a circuit breaker used as a
switch is acceptable). The mains power supply must be protected by a differential
magneto-thermal switch complying with the law provision in force.
Before proceeding, ensure that the mains supply is disconnected. Subsequently, follow
the steps outlined below:
___________________________________________________________________________
FAQ
www.parklio.com
[email protected]
+385977247276
