53
Pole Mount
The gateway is mounted to a pole via a single hose clamp. The gateway comes with a
clamp holder and four M4 screws for installing a hose clamp carrier to the gateway.
To mount the gateway to a pole, please follow the steps below:
STEP 1.
Position the pole mount holder so that the holes of the pole mount holder
coincide with the holes on the back of the Parklio™ Gateway. Use the screwdriver and
the provided M4 screws to fix the pole mount holder.
STEP 2.
Unscrew the hose clamp.
___________________________________________________________________________
FAQ
www.parklio.com
[email protected]
+385977247276
