WR1500
4-Port Wireless DSL/Cable Router
WR1500
4-Port Wireless DSL/Cable Router
®
28
Appendix 2 - Troubleshooting the WR1500 Initial
Setup and Installation -
Continued
proper casing.
Use the
RESET
RESET
button on the side panel of the
button on the side panel of the
WR1500 Wireless Router to restore the factory
default confi guration fi le (hold this button in for
more than fi ve seconds). This will restore all of
the factory defaults including the password.
Problems with the Ethernet Interface
Troubleshooting the Ethernet Interface
PROBLEM
PROBLEM
CORRECTIVE ACTION
CORRECTIVE ACTION
I cannot access
the WR1500
Wireless Router
from the Ethernet
If all of the
If all of the
LAN
LED’s on the front panel
LED’s on the front panel
are off, check the Ethernet cable connection
between your WR1500 Wireless Router and
the computer connected to the
LAN
port.
Check for faulty Ethernet cables. Make sure
the computer’s Ethernet adapter is installed
and working properly or
Verify that the IP addresses and the subnet
masks of the WR1500 Wireless Router and
Continued next page