Horizons 1500WR Wireless 4-Port Router
75
ParkerVision
9.4 Configuring Address Mapping
Ordering your rules is important because the 1500WR Wireless Router applies the rules in the order
that you specify. When a rule matches the current packet, the 1500WR Wireless Router takes the cor-
responding action and the remaining rules are ignored. If there are any empty rules before your new
configured rule, your configured rule will be pushed up by that number of empty rules. For example, if
you have already configured rules 1 to 6 in your current set and now you configure rule number 9. In
the set summary screen, the new rule will be rule 7, not 9. Now if you delete rule 4, rules 5 to 7 will be
pushed up by 1 rule, so old rules 5,6 and 7 become new rules 4, 5 and 6.
To change your 1500WR Wireless Router’s address mapping settings, click
ADVANCED, SUA/NAT
and then the
Address Mapping tab
. The screen appears as shown.
The table below describes the setting in the above screen.
LABEL
DESCRIPTION
#
This field displays the index number of the address mapping rule.
Local Start IP
This refers to the Inside Local Address (ILA), that is the starting local IP address. Local IP
addresses are N/A for
Server
port mapping.
Local End IP
This is the end local IP address. If the rule is for all local IP addresses, then this field
displays 0.0.0.0 and 255.255.255.255 as the
Local End IP
address. This field is
N/A
for
One-to-One
and
Server
mapping types.
Global Start IP
This refers to the global IP address. 0.0.0.0 is for a dynamic IP address from your ISP
with
Many-to-One
and
Server
mapping types.
Global End IP
This is the ending Inside Global Address (IGA), that is the starting global IP address.
This field is
N/A
for
One-to-One, Many-to-One
and
Server
mapping types.
Type
Choose the port mapping type from the drop down list.
Insert
Click
Insert
to insert a new mapping rule before an existing one.
Edit
Click
Edit to go to
the
Address Mapping Rule
screen.
Delete
Click
Delete
to delete an address mapping rule.