Horizons 1500WR Wireless 4-Port Router
59
ParkerVision
8.2.1 Ethernet Encapsulation Service Type - Continued
The following table descirbes the labels on the screen on the preceeding page.
LABEL
DESCRIPTION
Encapsulation
You must choose the Ethernet option when the WAN port is used as a regular
Ethernet.
Service Type
Select from
Standard, RR-Toshiba
(RoadRunner Toshiba authentication method),
RR-Manager
(Roadrunner Manager authentication method)
RR-Telstra
or
Telia
Login.
Choose a Roadrunner service type if your ISP is Time Warner’s Roadrunner;
otherwise choose
Standard.
User Name
Enter the username given to you by your ISP.
Password
Enter the password associated with the login name above.
Retype to
Confirm
Type your password again here to ensure that what you entered in the
Password
field above was what you intended.
Login Server IP
Address
The 1500WR Wireless Router will find the Roadrunner Server IP address if this
field is left blank. If it does not, then you must enter the authentication server IP
address.
Login Server (Telia
Login only)
Type the domain name of the Telia login server, for example “logini .telia.com”.
This field is not available on all models.
Relogin Every(min)
(Telia Login only)
The Telia server logs the 1500WR Wireless Router out if the 1500WR Wireless
Router does not log in periodically. Type the number of minutes from 1 to 59 (30
recommended) for the 1500WR Wireless Router to wait between logins.
This field is not available on all models.
Apply
Click
Apply
to save your changes back to the 1500WR Wireless Router.
Reset
Click
Reset
to begin configuring this screen afresh.
8.2.2 PPPoE Encapsulation
PPPoE (Point-to-Point Protocol over Ethernet) is an IETF Draft standard (RFC 2516) specifying how
a personal computer (PC) interacts with a broadband modem (DSL, cable, wireless, etc.) connection.
The PPP over Ethernet option is for a dial-up connection using PPPoE.
The screen shown on the next page is for
PPP over Ethernet
encapsulation.