manualshive.com logo in svg

ParkerVision Horizons 1500WR, User Manual, Page: 35 / 106

Share
Download
ParkerVision Horizons 1500WR User Manual Download Page 35

Horizons 1500WR Wireless 4-Port Router 

35

ParkerVision

Chapter 5

LAN Screens

This chapter describes how to configure LAN settings.

5.1 

LAN Overview

Local Area Network (LAN) is a shared communication system to which many computers are at-

tached. The LAN screens can help you configure a LAN DHCP server, manage IP addresses, and 

partition your physical network into logical networks.

Please see the Wizard Setup chapter for the background information about Primary and Secondary 

DNS Server and IP Address and Subnet Mask.

5.2 

LANs and WANs

A LAN is a computer network limited to the immediate area, usually the same building or floor of a 

building. A WAN (Wide Area Network), on the other hand, is an outside connection to another net-

work or the Internet.

5.2.1   LANs, WANs and the 1500WR Wireless Router

The actual physical connection determines whether the 1500WR Wireless Router ports are LAN or 

WAN ports. There are two separate IP networks, one inside, the LAN network; the other outside: the 

WAN network as shown next:

Summary of Contents for Horizons 1500WR











































































































Reviews:

No comments