Parker PowerStation XP Series, User Manual, Page: 52 / 65

Chapter 4: Maintaining the PowerStation Performing Internal Maintenance
XP Series PowerStation User Guide
4-8
Figure 4-5: Replacing the USB Ground on the 6” Backshell
Closing the PowerStation
1
If you are using a 6” PowerStation, replace the USB ground on the
inside of the backshell as discussed on page 4-7.
2
Replace the backshell on the PowerStation, refer to steps 3 and 4 on
page 4-7.
3
Remount the PowerStation in the enclosure, refer to Installing the XP
PowerStation on page 2-7.
4
Reconnect all cables:
5
Turn on the PowerStation.
The USB ground is
replaced on the inside of
the backshell.