PHD User Guide
33
9. Mounting the PHD
To mount the PHD into a vehicle mounting panel,
1. Install the PHD from the front.
2. Ensure that:
•
the PHD is oriented to the operator’s viewing angle
•
the wire harness connects easily to the connectors and that the bend radius is adequate
•
the harness is shielded from harsh impact
3. Secure the PHD using 4 screws or metal spring clips.
4. Install the bezel, typically provided by the customer (Parker does sell a snap-on cosmetic bezel as an
optional accessory).
The PHD may also be mounted from the rear of the panel without a bezel for a flush appearance using
insert studs and nuts.
Drawings and other documents may be found at www.parker.com/ecd or contact your Parker
representative.
9.1. Dimensions
The dimensions for each of the PHD family of displays is provided below.
9.1.1.
PHD28
41.5
4X R7.3
71.5
67.0
107.5
4X Ø4.5
97.0
120.5
23.5
39.0
7.0
4.0
Figure 9.1. PHD28 dimensions (mm)