Parker PCH1 T P Series, User Manual, Page: 8 / 107

General
8
1.4 Important User Information
This document and other information from Parker Hannifin Corporation, its subsidiaries or authorized
distributors provides product or system options for further investigation by users having technical expertise.
The user, through their own analysis and testing, is solely responsible for making the final selection of the
system and components and assuring that all performance, endurance, maintenance, safety and warning
requirements of the application are met. The user must analyse all aspects of the application, follow
applicable industry standards, and follow the information concerning the product in the current product
catalog and in any other materials provided from Parker, its subsidiaries, or authorized distributors.
To the extent that Parker, its subsidiaries, or authorized distributors provide component or system options
based upon data or specifications provided by the user, the user is responsible for determining that such
data and specifications are suitable for all applications and reasonably foreseeable uses of the components
or systems.
1.5 Intended Use
The PCH Portal must be used as follows:
• As intended for industrial environments and conditions as compliant with the regulatory agencies
of the region.
• In the original state without unauthorized modifications to the unit. The only permissible
configurations and/or modifications allowed are mentioned in the documentation supplied with the
product.
•
In perfect technical condition.
•
The PCH Portal has been developed and manufactured in accordance with the basic and proven
safety principles of EN ISO 13849, LVD 2014/35/EU (low voltage directive) and EN61000-6-2
(Electromagnetic compatibility) and European Machinery Directive 2006/42/EC. The requirements
of EN ISO 13849-1 and EN ISO 13849-2 must be taken into consideration to implement and
operate the PCH Portal. When using this product in machines or systems subject to specific C
standards, the requirements specified in these standards must be observed.
• This product is not CSA Certified. To conform to CSA C22.2 requirements please ensure the PCH
Portal is connected to a class 2 power supply or equal as outlined in CSA Article 2.024 for low
voltage equipment. The output of this power supply may not exceed 100 VA, with the operating
voltage not more than 30 V rms, 42.4 V peak, or 60 V dc.
If standard accessories/components are connected (e.g., sensors, actuators, etc.) the specified limits of
pressure, temperature, electrical data, torques, etc. must be complied with.
Even though care has been taken in the preparation and publication of the contents of this manual, we do
not assume legal or other liability for any inaccuracy, mistake, misstatement, or any other error of
whatsoever nature contained herein. The material in this manual is for information purposes only and is
subject to change without notice.
1.6
Service Information
Consult the local Parker Service Agent if you have any technical problems or queries.