Parker PAC, Installation Manual, Page: 64 / 197

SYSTEM START-UP AND CONFIGURATION
64 Parker Automation Controller Installation Guide
Programming your Xpress HMI in the PAC
The PAC can be ordered with the optional Xpress HMI software embedded in the PAC. This option allows
you to develop and run your Xpress HMI program from the PAC. To begin development of your project,
end of the IP Address like the Configuration Tool). The Xpress Shell will show up in your browser and you
are ready to begin developing your PAC Xpress HMI project. Please refer to the Interact Xpress User
Guide to help develop your project on the PAC. The Interact Xpress user guide can be downloaded from
the PAC product page on
www.parkermotion.com .
The PAC with the embedded Xpress HMI option allows you to easily share tags between the two projects to
make it easier to create your application. Any POU, Global Variable, or Persistent list in your PAC project
can share tags with Xpress. To expose your PAC project tags to your Xpress project, follow these
instructions:
PAC Project Configuration
1. Open the Parker Automation Manager software, select , and
. Name the Project PAC Xpress Tags . Choose OK.
2. Select the appropriate Device for use with the PAC. (PAC320-MXX2X-XX, PAC320-CXX2X-XX,
PAC320-PXX2X-
3. Choose OK