Parker P Series, User Manual, Page: 63 / 316

Parker Hannifin
P Series User Guide 61
Figure 21. Example of Digital Output Signal Wiring
Note) For output signals DO1~ DO8, GND24 terminal is disconnected GND24.

Example of Analog Input Signal Wiring
Please see “
8.5 Analog Speed Override “ and “ 6.10.3 Torque Limit Setting “ for operation
of analog input signals.
The window if analog input signal is -10V ~ 10V.
Impedance of the input signals is approximately
22KΩ.
Example of resistance selection
R1 R2
5K
Ω
6K
Ω
10K
Ω
12K
Ω
Figure 22. Example of Analog Input Signal Wiring
www.comoso.com