Parker P Series, User Manual, Page: 208 / 316

Parker Hannifin
P Series User Guide 206
SubIndex 5 Restore index parameters
Variable
Format
Setting Range
Default
Value
Unit
Accessib
ility
PDO
Allocation
Change
Property
Store
UDINT 0 to 0xFFFFFFFF 0 - RW No - No
Table 104. Restore Parameters
Reset the drive’s parameters. To prevent mistakes, using the ASCII code
corresponding to ‘load’ will reset the parameters.
0x64 0x6C
MSB LSB 16 15
0x6F 0x61
d l o a
ASCII 코드
Writing “load” at SubIndex 1 will reset all parameters.
Writing “load” at SubIndex 2 will reset only communication parameters (0x1000~)
Writing “load” at SubIndex 3 will reset only parameters (0x6000~).
Writing “load” at SubIndex 4 will reset only the drive’s specific parameters (0x2000~)
Writing “load” at SubIndex 5 will reset only Index parameters (0x3000~).
The drive needs to be restarted for the reset value to apply.
0x1018 Identity Object
SubIndex 0 Number of entries
Variable
Format
Setting Range
Default
Value
Unit
Accessib
ility
PDO
Allocation
Change
Property
Store
USINT - 4 - RO No - No
SubIndex 1 Vendor ID
Variable
Format
Setting Range
Default
Value
Unit
Accessib
ility
PDO
Allocation
Change
Property
Store
UDINT - 0x00007595 - RO No - No
SubIndex 2 Product code
Variable
Format
Setting Range
Default
Value
Unit
Accessib
ility
PDO
Allocation
Change
Property
Store
UDINT - 0x00010001 - RO No - No
SubIndex 3 Revision number
Variable
Format
Setting Range
Default
Value
Unit
Accessib
ility
PDO
Allocation
Change
Property
Store
UDINT - - - RO No - No
SubIndex 4 Serial number
Variable
Format
Setting Range
Default
Value
Unit
Accessib
ility
PDO
Allocation
Change
Property
Store
UDINT - - - RO No - No
Table 105. Identity Object
Shows information on the device
www.comoso.com