4
OEM6250 Installation Guide
Mounting the OEM6250
NOTE:
The drawing below illustrates the dimensions of the OEM6250 printed circuit board. The
board is shipped from the factory attached to sheet metal which allows either flat mounting or side
mounting of the OEM6250. This board will fit in a 6U rack (if you remove the PCB from the sheet metal).
Max.
Component
Height
1.48
(37.59)
9.19
(233.43)
11.00
(279.40)
0.70
(17.78)
1.00
(25.40)
8.00
(203.20)
10.10
(256.54)
10.01
(254.25)
9.67
(245.62)
Inches (Millimeters)
Provision for #10
Mounting Screws
(6 Plcs.)
1.00
(25.40)
0.50
(12.70)
6 5 4 3 2 1
ANI Option Board
If you ordered the “OEM6250-ANI”
product, this option board is factory
installed. If you ordered the board
separately (p/n “OPT-OEM6250-A”),
install it now. Allow 0.91 (23.11)
mimimum for component height
Environmental
Considerations
Temperature. Operate the OEM6250 in ambient
temperatures between 32
°
F (0
°
C) and 122
°
F (50
°
C). Provide a
minimum of 2 inches (50.8 mm) of unrestricted air-flow space
around the OEM6250 (see illustration). Fan cooling may be
necessary if adequate air flow is not provided.
Humidity. Keep below 95%, non-condensing.
Airborne Contaminants, Liquids. Particulate
contaminants, especially electrically conductive material,
such as metal shavings and grinding dust, can damage the
OEM6250. Do not allow liquids or fluids to come in contact
with the OEM6250 or its cables.
2.0
(50.8)
2.0
(50.8)
2.0
(50.8)
2.0
(50.8)
Minimum Airf ow Space = 2 inches
