Parker GVM Series, Technical Manual

Page: 81 / 82

- 81
–
18-06-08 PVD3668_GB_GVM_June_2018
4.4. Maintenance Operations
Generality
DANGER: The installation, commissioning and maintenance operations
must be performed by qualified personnel, in conjunction with this
documentation.
The qualified personnel must know the safety local regulations.
They must be authorized to install, commissioning and operate in
accordance with established practices and standards.
Please contact PARKER for technical assistance.
Operation Periodicity
Section
number
Cooling water quality inspection Every year §3.6
Check all tightening torques on all
screws in the terminals box
Every year §4.2
Check the bearings Every year §3.5
Clean the motor Every year
Inspect and lubricate shaft seals Every year §4.2.3
Inspect and lubricate shaft splines Every year
Inspect coolant fittings, and hoses Every year §3.6
Inspect power and feedback cables Every year §4.3