-5-
13. Never attempt to disassemble or remodel the motor and driver. If such service is necessary, please contact us. We
assume no responsibility for products that have been disassembled or remodeled without permission.
14. For the DYNASERV DR series motors, a coating has been applied on the load attachment surface of the upper
surface of the motor and the stator on the lower surface in order to prevent rust. When starting to use the product,
wipe off the coating completely with cloth or paper soaked in a petroleum or chlorine solvent before assembling. If
any of the coating remains, it may affect the mechanical precision.
15. Do not place the motor on the floor and other surface in the manner shown in the figure below when carrying and
installing the DYNASERV. The cables are crushed by the motor’s own weight and the copper wires may be broken
inside the cables. If it cannot be avoided to place the motor in such a manner, a support bench should always be
placed so that the cables are lifted. Furthermore, if the cables need to be bent when installed in a device, etc., the
minimum bending radius should be 50 mm or more. The cables are not strong enough to live up to robot cable
specifications, so they should not be bent repeatedly.
An example of a DM series motor
An example of a DM series motor
Rust-proof
coated
surface
The minimum
bending radius
should be
50mm or more.
The minimum
bending radius
should be
50mm or more.
