Parker DUSTHOG PNP, Owner'S Manual

Page: 19 / 42

15
DUSTHOG PNP Series
Figure 5
Figure 6
TABLE 3
Icon Key
ICON DESC
The Home
you to the
The Sett
take y
custom
sc
The Info
will tak
custom
conta
Blow
Blower is
mode
Statu
Norma
co
Status =
Operat
norm
Statu
Fault co
needs
Decrea
A
Increas
A
CRIPTION
e icon will tak
e home scree
tings icon will
you to the
mer sengs
creen.
ormaon icon
e you to the
mer service
act screen.
wer is ON
s in STANDBY
and is OFF
s = GOOD
al operang
ndion
= WARNING
ting outside
mal ranges
s = FAULT
ondion that
s a„enon
se Speed or
Airflow
se Speed or
Airflow
Color
ke
n.
Blue
Blue
Blue
Green
Y
Blue
Green
Yellow
Red
Blue
Blue
4.3 Touchscreen Operation
4.3.1 Start-Up and Home Screen
The display will turn on automatically when the system is
powered up. The first screen will display as shown below,
see Figure 5. This screen will also act as a screen saver
when the blower is not operating. After 2-3 minutes of non-
use the display will change to this screen. When you want
to use the unit, just tap the screen with your finger and it will
change to the main display screen shown in Figure 6.
The home display screen shown in Figure 6 will be displayed
during operation. This will act as your status screen and be your
gateway to other screens. The screens are broken up in groups:
Basic – These are your status screens for filters,
blower and cleaning.
Customer settings – These screens are for the customer
to make setting changes to the unit.
Optional screens – These screens are based on customer
selected options like Auto-Flow, After Filter monitoring or unique
screens required for a special application. These screens
are based on customer order and loaded at the factory.
4.3.2 Standard Format
The icon key, Table 3, outlines the various icons that are
used on the screen for various reasons and may indicate
status or conditions. The Home, Settings, and Information
icons are shown at the bottom of most screens and will take
you directly to their associated screens. The Status indicator
icons are also buttons that will take you to their associated
basic screens as outlined in section 4.3.3.