Parker EME
Technical Characteristics
192-120148N5 June 2011
47
Motors and feedback systems supported
Motors
Direct drives
Linear motors
Torque motors
Sinusoidally commutated synchronous motors
Maximum electrical turning frequency: 1000Hz*
Max. velocity at 8 pole motors: 15000min
-1
.
General max. Velocity:
60*1000/number of pole pairs in [min
-1
].
Max. number of poles = 600
Sinusoidal commutated asynchronous motors
Maximum electrical turning frequency: 1000Hz
Max. velocity: 60*1000/number of pole pairs - slip
in [min
-1
].
Field weakening: typically up to triple (higher on
request).
Temperature sensor: KTY84-130
(insulated in accordance with EN60664-1 or
IEC60664-1)
3 phase synchronous direct drives
Position encoder (Feedback)
LTN:
Option F10: Resolver
RE-21-1-A05, RE-15-1-B04
Tamagawa:
TS2610N171E64, TS2620N21E11,
TS2640N321E64, TS2660N31E64
Tyco (AMP)
V23401-T2009-B202
Option F11: SinCos
©
Rotary feedback with HIPERFACE
®
interface:
Singleturn (SICK|Stegmann)
Multiturn (SICK|Stegmann) Absolute position up to
4096 motor revolutions.
For example: SRS50, SRM50, SKS36, SKM36,
SEK52, SEK52, SEL52, SEK37, SEL37, SEK160,
SEK90
* higher values on request
Special encoder systems for direct drives
Analog hall sensors
Option F12
Sine-Cosine signal (max. 5Vss*; typical
1Vss) 90° offset
U
-V signal (max. 5Vss*; typical 1Vss) 120°
offset.
Encoder
(linear or rotatory)
Sine-Cosine (max. 5Vss*; typical 1Vss)
(max. 400kHz) or
TTL (RS422) (max. 5MHz; track A or B)
Bypass function for encoder signals
(limit frequency** 5MHz, track A or B)
with the following modes of commutation:
Automatic commutation or
U, V, W or R, S, T commutation signals
(NPN open collector) e.g. digital hall
sensors, incremental encoders made by
Hengstler (F series with electrical ordering
variant 6)
Digital, bidirectional interface
All EnDat 2.1 or EnDat 2.2 (Endat01,
Endat02) feedback systems with
incremental track (sine-cosine track)
linear or rotary
max. 400kHz Sine-Cosine
Distance coded feedback systems
Distance coding with 1VSS - Interface
Distance coding with RS422 - Interface
(Encoder)
*Max. differential input between SIN- (X13/7) and SIN+ (X13/8).
** Limit frequency = 1MHz for Compax3M (higher bandwidths on request)
